no_std Rust Environment
The term Embedded Programming is used for a wide range of different classes of programming. Ranging from programming 8-Bit MCUs (like the ST72325xx) with just a few KB of RAM and ROM, up to systems like the Raspberry Pi (Model B 3+) which has a 32/64-bit 4-core Cortex-A53 @ 1.4 GHz and 1GB of RAM. Different restrictions/limitations will apply when writing code depending on what kind of target and use case you have.
There are two general Embedded Programming classifications:
These kinds of environments are close to a normal PC environment. What this means is you are provided with a System Interface E.G. POSIX that provides you with primitives to interact with various systems, such as file systems, networking, memory management, threads, etc. Standard libraries in turn usually depend on these primitives to implement their functionality. You may also have some sort of sysroot and restrictions on RAM/ROM-usage, and perhaps some special HW or I/Os. Overall it feels like coding on a special-purpose PC environment.
Bare Metal Environments
In a bare metal environment no code has been loaded before your program.
Without the software provided by an OS we can not load the standard library.
Instead the program, along with the crates it uses, can only use the hardware (bare metal) to run.
To prevent rust from loading the standard library use
The platform-agnostic parts of the standard library are available through libcore.
libcore also excludes things which are not always desirable in an embedded environment.
One of these things is a memory allocator for dynamic memory allocation.
If you require this or any other functionalities there are often crates which provide these.
The libstd Runtime
As mentioned before using libstd requires some sort of system integration, but this is not only because
libstd is just providing a common way of accessing OS abstractions, it also provides a runtime.
This runtime, among other things, takes care of setting up stack overflow protection, processing command line arguments,
and spawning the main thread before a program's main function is invoked. This runtime also won't be available in a
#![no_std] is a crate-level attribute that indicates that the crate will link to the core-crate instead of the std-crate.
The libcore crate in turn is a platform-agnostic subset of the std crate
which makes no assumptions about the system the program will run on.
As such, it provides APIs for language primitives like floats, strings and slices, as well as APIs that expose processor features
like atomic operations and SIMD instructions. However it lacks APIs for anything that involves platform integration.
Because of these properties no_std and libcore code can be used for any kind of
bootstrapping (stage 0) code like bootloaders, firmware or kernels.
|heap (dynamic memory)||*||✓|
|collections (Vec, HashMap, etc)||**||✓|
|stack overflow protection||✘||✓|
|runs init code before main||✘||✓|
|writing firmware, kernel, or bootloader code||✓||✘|
* Only if you use the
alloc crate and use a suitable allocator like alloc-cortex-m.
** Only if you use the
collections crate and configure a global default allocator.